See the User Guide for your model available at the Drobo Support Center. Note: The user must be already set up as a user on the Drobo NAS with credentials in place. You will need to enter the following credentials. The activation page will now appear that will link your Drobo NAS to your FileFlex account.
#Drobo dashboard remote software
Note: The antivirus software must already be installed and running with a valid license on the host machineħ. To edit the device settings or to define which antivirus software on the host machine will be used to scan files uploaded to it, please refer to the section 'Device Settings'. In the setup wizard, you will have the option to edit the following device settingsĦ. After you have added the NAS as a content source, it can be accessed over the internet.ĥ. Note: You must be on the same network of the Drobo NAS being added, via either LAN or Wi-Fi. Select the Drobo icon and run the setup wizard. In the My Content tab, select the large red '+" Add Content Source iconĤ. Select the ' Files' view in the left navigation menuģ.
#Drobo dashboard remote Pc
From your PC or mobile device with the FileFlex Connector already installed and connected to the NAS over the same network whether via LAN or Wi-Fi, open FileFlex.Ģ. NOTE: The PC should be connected to the NAS over the same network.ġ. Next, you must link your FileFlex account to your Drobo NAS. Step 2: Link your FileFlex account to the Drobo NAS. (If you have not already installed Drobo Dashboard, you can download it here.) Open the Drobo Apps tab from the left navigation column, select the FileFlex Connector and click Install.
#Drobo dashboard remote install
Install the FileFlex Connector on your Drobo from Drobo Apps. Open your Drobo Dashboard and log in as the Administrator. If you're on Windows: - From Windows Explorer pick to Mount network drive and enter Drobo's address/DroboApps.
If you're on a Mac:- Open Finder -> Go -> Connect to server (or user Cmd+K shortcut), enter the server_address/DroboApps, provide credentials for access.Write down the IP address that will be displayed in the viewing pane. To do this, open the Drobo Dashboard, select Status in the left side navigation bar, then click the dropdown in the viewing pane and select Network Information. You need to obtain the IP address of your Drobo.Before you can begin, if you have not already done so, you must mount Drobo Apps.see the Installation Guide for your Drobo NAS model available at the Drobo Support Center Note: You must be already set up as a user on the Drobo NAS with credentials in place. Step 1: Install the FileFlex Connector on the Drobo NAS. If you have permission, use the following steps to connect to your Drobo. Note: You will need authorization from your IT department in order to be able to connect to a Drobo NAS.
0 kommentar(er)
